Your FPGA Design Partner






               icn_cart   View Basket   | Checkout   | Tracking order |  Logout

Amontec JTAGkey-Tiny

master_small02 visa_small

We ship our products worldwide!
Please check our online
Shipping Cost Calculator

OpenOCD project

Amontec JTAGkey related links

Amontec JTAGkey JTAGkey2
Generic USB to JTAG Dongle
Based on FTDI FT2232
Amontec JTAG Pinout
Including Official ARM 20-pin Connector ( JTAG Pin-out )
Amontec JTAG Accelerator
Now fully supported by OpenOCD JTAG software.
Amontec sdk4arm
Software Dev. Kit for ARM
Eclipse - GCC - OpenOCD - JTAGkey - your arm target board

Amontec Chameleon Links

Amontec Chameleon POD The generic JTAG interface Dongle
Amontec ARM Debug ValuePack
The easiest way for ARM JTAG and other ARM debug
Amontec JTAG Accelerator
The solution to flash ARM via JTAG at 363Kbytes/sec.
Amontec Chameleon Programmer Configure your POD in the minute with pre-compiled configurations.


The Amontec JTAGkey2 in production. First High-Speed USB JTAG Dongle.

Fully compatible with original JTAGkey but with a faster speed as 4x to 6x faster.

New features:
- Hi-Speed USB 2.0 480MHz
-RTCK (return TCK Clock support)
-30 MHz JTAG TCK Clock

 > Home > Products > JTAGkey-Tiny

Amontec JTAGkey-Tiny :
  Debug your ARM at a low cost !

Self-powered from any USB HUB: < 85mA from USB

Wide target
voltage range
2.8V to 5.0V

ARM download speed
( OpenOCD via DCC)

max. JTAG speed:

Adopted by the Open
On-Chip Debugger
OpenOCD compatible !

Specially designed for ARM Hobbyists starting with sdk4arm ( Yagarto ) + OpenOCD !

Direct connection to the standard Multi-ICE 20-pin ARM Header!



JTAGkey-Tiny is the ideal USB tool for engineers when custom debug solutions and custom test solutions need to be up quickly!

Get the last free drivers:
JTAGkey Drivers for Linux
JTAGkey Drivers for Windows

JTAGkey can remote:
- USB to JTAG interface,
- USB to SPI interface,
- USB to I2C interface and
- USB to GPIO interface
in very easy ways !

unlocking the power of JTAG interface !

Amontec JTAG key-Tiny Features

USB2.0 (full-speed, 12Mbits/sec).
JTAG / IEEE 1149.1 compatible.
JTAG Baudrate up to 6Mbits/sec (programmable)
All JTAG signals are 5V down to 2.8V tolerant
Based on the FTDI FT2232 (FT2232L) USB device.
Designed for FTDI MPSSE easy-to-use.
Free drivers for Linux.
Free drivers for Windows XP, Server 2003, 2000.
Free drivers for Windows CE.NET (ARM/Xscale/X86/others).
USB Hot-Plug
ARM Muli-ICE 20-pin header compatible.
TRST_N output programmable as push-pull or open-drain.
SRST_N output programmable as push-pull or open-drain.
Support for SRST_N software monitoring.
TDO input over-voltage protection.
SRST_N input over-voltage protection.

Download the

FREE sdk4arm,

and debug your

ARM via Eclipse!

It is here


Contact   Amontec Team today ...

[Home] [Policy & Privacy] [Sitemap]

Copyright © 2003-2009, Amontec - Gauch. All rights reserved.