Your FPGA Design Partner

 

 

amontec

 

 

               icn_cart   View Basket   | Checkout   | Tracking order |  Logout

JTAG Accelerator

master_small02 visa_small
BUY ONLINE

We ship our products worldwide!
Please check our online
Shipping Cost Calculator

OpenOCD project


Amontec JTAGkey related links

Amontec JTAGkey JTAGkey2
Generic USB to JTAG Dongle
Based on FTDI FT2232
Amontec JTAG Pinout
Including Official ARM 20-pin Connector ( JTAG Pin-out )
Amontec JTAG Accelerator
Now fully supported by OpenOCD JTAG software.
Amontec sdk4arm
Software Dev. Kit for ARM
Eclipse - GCC - OpenOCD - JTAGkey - your arm target board


Amontec Chameleon Links

Amontec Chameleon POD The generic JTAG interface Dongle
Amontec ARM Debug ValuePack
The easiest way for ARM JTAG and other ARM debug
Amontec JTAG Accelerator
The solution to flash ARM via JTAG at 363Kbytes/sec.
Amontec Chameleon Programmer Configure your POD in the minute with pre-compiled configurations.

corner_nav_br

The Amontec JTAGkey2 in production. First High-Speed USB JTAG Dongle.

Fully compatible with original JTAGkey but with a faster speed as 4x to 6x faster.

New features:
- Hi-Speed USB 2.0 480MHz
-RTCK (return TCK Clock support)
-30 MHz JTAG TCK Clock

 > Home > Products > JTAG Accelerator

The easiest way to speed up JTAG Interfaces
  • 2x faster than the Macraigor Raven JTAG Emulator
  • 10x faster than the Wiggler JTAG dongle
  • FREE interface specification
  • fully integrated in the OpenOCD JTAG server
  • Able to archive a 363KBytes/secondes Flash download
    		•

    Coming for FREE for all Chameleon POD users

    Amontec Chameleon’s JTAG Accelerator specification : amt_ann005.pdf
    The svf binary configuration for the Chameleon POD : amontec_jtag_accelerator.amtsvf

    The Amontec JTAG Accelerator is a controller speeding-up the serial JTAG interface protocol from an EPP mode of the parallel port of your computer.

    Features of the Amontec Chameleon’s JTAG Accelerator:

    • Amontec Chameleon POD compatible
    • EPP parallel port compatible
    • SPP parallel port compatible
    • Up to a 16MHz JTAG TCK Frequency
    • up to 2MBytes/s JTAG datarate.
    • Baudrate controllable from 16MHz to 244Hz
    • RTCK feature supported
    • Integrated JTAG TAP controller/monitor
    • Test mode feature
    • Auto-detection feature
    • SRST_N and TRST_N signals configurable as push-pull and as open-drain buffer.
    • Monitoring all JTAG port signals
    • Easy to adapt bit-banged version software ( Wiggler dongle )
    • 2x faster than the Macraigor Raven emulator
    • 10x faster than your own-made Wiggler

    Fully adopted by the OpenOCD JTAG server, visit  http://openocd.berlios.de/web/

     

    Contact   Amontec Team today ...
    spacer02
    [Home] [Policy & Privacy] [Sitemap]

    Copyright © 2003-2009, Amontec - Gauch. All rights reserved.