Amontec JTAGkey Undedicated USB to JTAG cable Based on FTDI FT2232 Amontec JTAG Pinout Including Official ARM 20-pin Connector ( JTAG Pin-out ) Amontec JTAG Accelerator Now fully supported by OpenOCD JTAG software. Amontec sdk4arm Software Dev. Kit for ARM Eclipse - GCC - OpenOCD - JTAGkey - your arm target board
From FPGA configurations to ARM based device configuration, via custom applications, the Chameleon POD can have a place on every prototyping area. The following table shows you the first applications of the Chameleon POD of our worldwide customers.
FPGA Device Configuration
JTAG application:
Chameleon POD in his pseudo- Xilinx ParallelCable-III Configuration
Configuration of a Xilinx Spartan-II FPGA and an in-system programmable configuration PROM.
Ethernet interface and RTOS development
Texas Instrument DSP board
Tested with IMPACT tool coming with the Xilinx WebPack freeware.
JTAG application:
Chameleon POD in his pseudo- Xilinx ParallelCable-III Configuration
Configuration of a Xilinx Virtex FPGA and an in-system programmable configuration PROM.
High performance AD / DA interface.
Contravess Virtex development board
Tested with Xilinx ISE 4.1 Tool
ARM Based Device Configuration
JTAG application:
Chameleon POD in his Raven Configuration
Configuration and debug of an ATMEL ARM Device
Ethernet interface and RTOS development
HEVs ARM-EBS board
Tested with Greenhills tools and GNU tools
JTAG application:
Chameleon POD in his pseudo- Wiggler Configuration
Configuration and debug of an Triscend A7 ARM Device
Triscend device evaluation project
Triscend A7 Demo Board
Tested with WindRiver debugger tools and GNU tools
)
)
)
